Documents‎ > ‎

PDM Documents

Recent Posts

  • Catia V5 Piston Drawing(22 Jan 2013)   Today we learnt how to look at the various views in Catia V5 which would be helpful in managing the PDM system Smar Team. We started to draw in Catia ...
    Posted 22 Jan 2013, 08:40 by Manish Abraham
Showing posts 1 - 1 of 1. View more »

Catia V5 Piston Drawing(22 Jan 2013)

posted 22 Jan 2013, 05:28 by Manish Abraham   [ updated 22 Jan 2013, 08:40 ]

 
Today we learnt how to look at the various views in Catia V5 which would be helpful in managing the PDM system Smar Team. We started to draw in Catia then learnt how to manage it in a Smar team PDM system. In case of company there is a standard format for the company which cant buy so many licence for Catia we can save it in a Pdf format and there are general links which are saved on the Smar team system. We can create the link manually. We can create a link between two separate individual documents ie. in Pdf and Catia drawing. We need two windows to create a link, one window there is pdf drawing and in the second window there is catia drawing we can open a separate view.
 
 
 
 
We did strength analysers for the rod , we prepared a geometry and put load and analysed the rod. We did the Analysis and simulation to check whether the part was ok when we applied a load, testing of physical parts was necessary or not was discussed.  The mesh size was determied then we applied load on the piston, and restrain was on the crank shaft.
 
 
The Various constraints where we applied the loads
manish abraham
 
 
 
To View the final CET Report Click Here
 
 
 
 
 

1-1 of 1